Pre Action Valve Sprinkler Systems

Pre Action Valve Sprinkler Systems

Foinbo® pre-action valve sprinkler systems are an effective and efficient way to protect buildings from potential fires. These systems are designed to provide an additional layer of safety by preventing accidental discharge of water in areas where the risk of fire is low. This system consists of a pre-action valve, fire detection devices and sprinkler heads.
Send Inquiry
Description
Technical Parameters

Production introduction

 

Foinbo® pre-action valve sprinkler systems are an effective and efficient way to protect buildings from potential fires. These systems are designed to provide an additional layer of safety by preventing accidental discharge of water in areas where the risk of fire is low. This system consists of a pre-action valve, fire detection devices and sprinkler heads.

 

One of the major advantages of foinbo® pre-action valve sprinkler systems is that they only discharge water when an actual fire has been detected. This ensures that water damage is kept to a minimum and the cost of repairs is reduced significantly. Moreover, the fire detection devices installed detect the presence of smoke or heat, and activate the sprinkler heads only in the affected areas, allowing for a quick response to the fire.

 

Product specification

 

Specification

ZSFY-Pre Action Valve Sprinkler Systems

 

3"

4"

5"

6"

8"

10"

12"

Rated Operation Pressure

1.6Mpa

Application Medium

Water ,Foam mixture

Connection Type

Flange End

Body Material

Ductile Iron

Installation

Vertical

Flange Standard

BS4504

 

FAQ

 

Q: What is a pre-action sprinkler system?

A: Pre-action fire sprinklers are a dry sprinkler system, water is not contained in the pipes but is held back by a pre-action valve. Pre-action valves are electrically operated valve that is activated by heat, smoke or flame.

Q: Function of deluge valve in fire fighting system.

A: The deluge valve plays a crucial role in fire fighting systems by rapidly releasing a large volume of water or foam when a fire is detected. This helps to quickly extinguish the fire and prevent it from spreading, minimizing damage to property and protecting the safety of occupants.

Q: How does the pre action valve work?

A: Pre-action valves are designed to provide added protection against fire in areas where traditional sprinklers may not be suitable. These valves work by keeping water from flowing into the system until it senses heat or smoke, at which point it opens up and releases the water to extinguish the fire. By only releasing water when it is needed and preventing water damage to property, the pre-action valve is an excellent solution for high-value assets and sensitive environments.

Q: What is the difference between pre-action and wet sprinkler system?

A: The difference between a wet system and the pre-action system is that in the pre-action system, the pipes are filled with compressed air and the sprinkler heads are all closed, and water is held back from the piping by a pre-action valve.

Q: Where are Preaction sprinkler systems used?

A: Pre-action sprinklers are also best-applied in cold climates where wet-pipe systems would freeze because water is readily and directly stored in pipes.

 

Hot Tags: pre action valve sprinkler systems, China pre action valve sprinkler systems manufacturers, suppliers, factory, Pre Action Valve Sprinkler Systems, Pre Action Valve System, Pre Action Valve Set, pre action alarm valve