Production introduction
Foinbo® non-return foot valve is a device used in fluid handling systems to ensure the flow of liquid in one direction only. It is an essential component in many applications such as irrigation systems, water supply networks, and industrial processes.
Foinbo® non-return foot valve works by allowing fluid to enter into the valve through the inlet port while preventing backflow through the outlet port. The valve contains a check valve that closes when the flow stops, preventing any backflow of fluid.
Products parameters
|
Specification |
H42X-Non Return Foot Valve |
||||||
|
2" |
2.5" |
3" |
4" |
5" |
6" |
8" |
|
|
Rated Operation Pressure |
1.6Mpa |
||||||
|
Strength test pressure |
4.8Mpa |
||||||
|
Application Medium |
Water ,Foam mixture |
||||||
|
Connection Type |
Flange End |
||||||
|
Valve Type |
Foot Check |
||||||
|
Body Material |
Ductile Iron |
||||||
|
Filter Net Material |
SS304,Stainless Steel. |
||||||
FAQ
Q: What is the non return foot valve ?
A: The non-return foot valve is an essential component of water systems that allows water to flow in one direction while preventing backflow. It is installed at the bottom of a suction pipe and uses a spring-loaded valve to keep water from flowing back into the well or pump when the pump is turned off.
Q: How does the non return foot valve?
A: The non-return foot valve ensures that fluid flows in only one direction and prevents backflow. It is an essential component of many fluid-based systems, especially those that involve pumping and distribution. This valve works seamlessly to keep the flow going in the right direction, and its simple yet effective design ensures reliability and efficiency
Q: What is the difference between a foot valve and a non-return valve?
A: The foot valve is there to hold the water in the lift pipe between operations. The non-return valve is there to hold the water in pump between operations.
Does a foot valve prevent backflow?
Yes, a foot valve is designed to prevent backflow by allowing fluid to flow in one direction only. This valve is installed at the bottom of a pipeline or pump and ensures that the liquid flows efficiently without any interruptions.
Q: Why is a foot valve called a foot valve?
A: A foot valve is a type of check valve that is typically installed at a pump or at the bottom of a pipe line (hence the name).
