Products Description
Specifications
Y flange strainer (also called a Y-type flanged strainer) is a mechanical device installed in pipelines to filter out debris, rust, dirt, and other solid particles from the flow of liquids, steam, or gases. It has a Y-shaped body with a strainer mesh inside and is connected to the pipeline using flanged ends for secure, leak-proof connections.
Fluid enters the strainer body.
The mesh or perforated screen captures suspended solids.
The cleaned fluid exits through the pipeline.
The debris collected in the screen chamber can be removed by opening the drain plug or cover.
Products Parameters
|
Model Number |
Flange Size |
W.Pressure |
Valve Type |
Color |
|
GL41X-16Q-50 |
2" |
1.0/1.6Mpa |
Y Type |
Red/Blue |
|
GL41X-16Q-65 |
2.5" |
1.0/1.6Mpa |
Y Type |
Red/Blue |
|
GL41X-16Q-80 |
3" |
1.0/1.6Mpa |
Y Type |
Red/Blue |
|
GL41X-16Q-100 |
4" |
1.0/1.6Mpa |
Y Type |
Red/Blue |
|
GL41X-16Q-125 |
5" |
1.0/1.6Mpa |
Y Type |
Red/Blue |
|
GL41X-16Q-150 |
6" |
1.0/1.6Mpa |
Y Type |
Red/Blue |
|
GL41X-16Q-200 |
8" |
1.0/1.6Mpa |
Y Type |
Red/Blue |
|
GL41X-16Q-250 |
10" |
1.0/1.6Mpa |
Y Type |
Red/Blue |
|
GL41X-16Q-300 |
12" |
1.0/1.6Mpa |
Y Type |
Red/Blue |
FAQ
Q: What is a Y flange strainer?
A Y flange strainer is a pipeline filtering device with a Y-shaped body, designed to remove debris, dirt, rust, and other particles from fluids. It has flanged ends for bolted connections to piping systems.
Q: Where are Y flange strainers used?
They are commonly used in water, oil, gas, steam, and chemical systems, particularly in pumps, valves, compressors, and heat exchangers to protect equipment from damage due to solid impurities.
Q: What is the difference between Y strainer and Y flange strainer?
Y strainer: Can have threaded, socket weld, butt weld, or flanged ends.
Y flange strainer: Specifically has flanged ends for easy installation and removal in large pipelines.
Q: What materials are Y flange strainers made of?
Typical materials include:
Cast iron / Ductile iron (for water, HVAC)
Carbon steel / Stainless steel (for high pressure, corrosive media, oil, gas, chemical)
Bronze / Brass (for marine or special fluid systems)
Q: What is the mesh size in a Y flange strainer?
Mesh size varies depending on application, usually from 20 mesh (coarse) to 200 mesh (fine). Selection depends on the particle size to be filtered.