Production introduction
Foinbo® remote fire monitor is a high-quality fire fighting equipment that is made of durable materials. The monitor body is made of SS304 stainless steel, which makes it resistant to corrosion and rust. The nozzle is made of aluminium alloy and is hard anodized for added durability. The hand wheels are also made of SS304 stainless steel, adding to its strength and sturdiness.
The foinbo® remote fire monitor is equipped with an explosion-proof horizontal and vertical motor drive, making it suitable for use in hazardous environments. It has a wireless control distance of approximately 80 meters, allowing for easy and safe operation from a distance.
The foinbo® remote fire monitor comes in different models, depending on the required flow rate. The PSKD 8/20W model has a flow rate of 1200 L/min, while the PSKD 10/80W model has a flow rate of 4800 L/min. The different models allow for flexibility in selecting the appropriate flow rate for different firefighting situations.
Products parameters
|
Model Number |
Flow Rate |
W.Pressure |
Water Max.Reach |
Max.Fog Angle |
Inlet Flange |
Power |
|
PSKD 8/20W |
1200 L/Min |
8 bar |
50 meters |
120° |
4 inch/DN100 @ BS4504 |
24V DC |
|
PSKD 8/30W |
1800 L/Min |
8 bar |
55 meters |
120° |
4 inch/DN100 @ BS4504 |
24V DC |
|
PSKD 8/40W |
2400 L/Min |
8 bar |
60 meters |
120° |
4 inch/DN100 @ BS4504 |
24V DC |
|
PSKD 8/50W |
3000 L/Min |
8 bar |
65 meters |
120° |
4 inch/DN100 @ BS4504 |
24V DC |
|
PSKD 10/60W |
3600 L/Min |
10 bar |
75 meters |
120° |
4 inch/DN100 @ BS4504 |
24V DC |
|
PSKD 10/80W |
4800 L/Min |
10 bar |
85 meters |
120° |
4 inch/DN100 @ BS4504 |
24V DC |
FAQ
Q: What is a RC fire monitor?
A: A RC fire monitor is a device used in firefighting to deliver high volumes of water or foam from a remote location. It is typically used in situations where direct access to the fire is difficult or dangerous.
Q: What is the monitor body made of?
A: The monitor body is made of SS304 stainless steel, which is corrosion-resistant and durable.
Q: What material is used for the monitor nozzle?
A: The monitor nozzle is made of aluminium alloy and is hard anodized to withstand high pressures and temperatures.
Q: How is the monitor controlled?
A: The monitor is equipped with explosion-proof horizontal and vertical motors that are controlled wirelessly from a distance of approximately 80 meters.
Q: What are the flow rate options for the PSKD RC fire monitor?
A: The PSKD RC fire monitor is available in six different models with flow rates ranging from 1200 L/Min to 4800 L/Min.