Production introduction
Foinbo® fire fighting foam monitors are designed to provide efficient and effective firefighting solutions for a range of industries. With four different models available, ranging from a flow rate of 1440 L/Min up to 2880 L/Min, you can find the perfect fit for your needs.
These monitors have a working pressure of 8 bar, with an inlet flange of 4 inches/DN100 @ BS4504, ensuring optimal flow and performance. The monitor body is made of aluminum alloy with a red epoxy powder coating for durability and resistance to corrosive elements. The monitor nozzle and handle are made of SS304 stainless steel, ensuring long-lasting performance and reliability.
One unique feature of these monitors is their foam self-educting capabilities, which allows for easy and effective application of foam to extinguish fires. Additionally, they are designed for use with straight steam only, ensuring that they are effective for a wide range of fire suppression scenarios.
Products parameters
|
Model Number |
Flow Rate |
W.Pressure |
Water Max.Reach |
Foam Max.Reach |
Inlet Flange |
|
FM 8/24Z-A |
1440 L/Min |
8 bar |
50 meters |
42 meters |
4 inch/DN100 @ BS4504 |
|
FM 8/32Z-A |
1920 L/Min |
8 bar |
55 meters |
48 meters |
4 inch/DN100 @ BS4504 |
|
FM 8/40Z-A |
2400 L/Min |
8 bar |
60 meters |
55 meters |
4 inch/DN100 @ BS4504 |
|
FM 8/48Z-A |
2880 L/Min |
8 bar |
65 meters |
60 meters |
4 inch/DN100 @ BS4504 |
FAQ
Q: What is the maximum flow rate of the fire fighting foam monitor?
A: The maximum flow rate of the fighting foam monitors varies depending on the model number. The FM 8/24Z-A has a flow rate of 1440 L/Min, FM 8/32Z-A has a flow rate of 1920 L/Min, FM 8/40Z-A has a flow rate of 2400 L/Min, and FM 8/48Z-A has a flow rate of 2880 L/Min.
Q: What is the working pressure of the fire foam monitors?
A: The working pressure of the fire fighting foam monitors is 8 bar.
Q: What is the size of the inlet flange for the fire fighting foam monitors?
A: The inlet flange for the fire foam monitors is 4 inch/DN100 @ BS4504.
Q: What is the material used for the construction of foam monitors?
A: The monitor body of the foam monitors is made of aluminium alloy with red epoxy powder coating while the monitor nozzle and handle are made of SS304 Stainless steel.
Q: Can the foam monitors be used for foam self-educting?
A: Yes, the foam monitors are designed to be foam self-educting. They can also be used for straight steam only.