Products Introduction
S 3% Foam Concentrate is synthetic multi‑purpose firefighting fluid tailored for 3% proportioning loops, delivering efficient suppression against hydrocarbon‑based liquid fires across diverse operating surroundings. This S 3% Foam Concentrate comes as clear yellowish liquid, with low‑viscosity traits at 20℃ to ensure unobstructed flow throughout pipework, foam nozzles and fire monitor assemblies. It reaches an expansion ratio of 6.4±1 alongside a 25% drainage time of 2.8 min. S 3% Foam Concentrate can swiftly spread across fuel surfaces to build a stable foam blanket, smother combustion and block flammable vapour from escaping. Its pH value ranges 8.7‑8.9, showing good adaptability to tap water, river water and seawater for variable on‑site water supplies.
S 3% Foam Concentrate is compatible with all standard 3% proportioning hardware, covering fixed fire‑fighting installations and mobile emergency foam units. This S 3% Foam Concentrate maintains stable liquid properties over long standby cycles, resisting turbidity and sediment formation under proper storage settings. Supplied in compact jerrycans and large‑volume industrial drums, S 3% Foam Concentrate simplifies overseas shipment, on‑site refilling and stock turnover for distributors and project contractors. Reliable foam durability keeps burning fuels sealed, buying precious time for fire crews to carry out hazard isolation and fire‑extinguishing operations.
Products Parameters
|
Model |
S 3% (-20℃) |
S 6% (-22℃) |
|
Appearance |
Clear Yellowish Liquid |
|
|
PH |
8.7-8.9 |
8.6-8.7 |
|
Viscosity @ 20℃ |
≤30 MPas |
≤30 MPas |
|
Expansion Ratio |
6.4±1 |
6.5±1 |
|
25% Drainage Time |
2.8( 1±20% ) min |
2.9(1±20%) min |
|
Freezing Point |
-20℃ |
-22℃ |
Products Description




Application Detail
- Airport Aircraft Refuelling Zone: Serve airport apron refuelling areas, handle jet‑fuel spill fires during aircraft refuelling and ground‑handling operations.
- Chemical Logistics Distribution Park: Protect large chemical logistics yards, respond to accidental fires triggered by leaked hydrocarbon liquid cargo.
- Inland River Barge Fuel‑Supplying Wharf: Fit inland river fuel‑bunkering docks, suppress fuel spill fires occurring during barge fuel loading and unloading procedures.
- Automotive Assembly Plant Fuel Test Workshop: Deploy within vehicle‑manufacturing fuel‑testing workshops, tackle gasoline‑related flash‑fire risks during component testing.
FAQs
Q: What pre‑commissioning checks are needed before charging S 3% Foam Concentrate into foam system tanks?
A: Inspect the liquid for floating residues or cloudiness. Run a small‑scale foaming trial, and fully clean storage tanks and pipelines to eliminate leftover impurities before filling.
Q: Can S 3% Foam Concentrate remain inside pipelines for several months without circulation?
A: Short‑term static residence is acceptable. Nevertheless, long‑term stagnation inside pipelines is discouraged; flush the piping periodically to avoid agent degradation and blockages.
Q: What will happen if S 3% Foam Concentrate gets blended with other brands of synthetic foam agents?
A: Random mixing with third‑party foam concentrates may trigger chemical incompatibility, causing precipitation, foam collapse and significant loss of firefighting efficiency. Cross‑brand mixing is not recommended.
Q: What ambient temperature range is recommended for daily storage of S 3% Foam Concentrate?
A: Store within 5℃‑35℃. Avoid sustained high‑temperature environments as well as repeated freeze‑thaw cycles, both will shorten the usable shelf‑life of the foam fluid.
Q: Is S 3% Foam Concentrate applicable for trailer‑mounted mobile foam fire units?
A: It works for trailer‑based mobile foam devices only when the proportioner is precisely calibrated for 3% mixing ratio. Mismatched proportioning hardware will produce ineffective foam.
