Production introduction
Foinbo® Breech inlet (breech inlet) is normally located on the ground floor of building to enable the fire and rescue service to connect hoses to supply water into dry riser, so that water can be pumped up to higher floors.
Product specification
|
Model |
Way of Inlet |
Outlet |
Working Pressure |
Material |
|
F4-1 |
4* 2.5" BS336 |
Flanged DN 100 |
24 Bar |
Ductile Iron |
|
F4-2 |
4* 2.5" BS336 |
Flanged DN 150 |
24 Bar |
Ductile Iron |
FAQ
Q: What is a breech inlet?
A: Breech inlet is an external water connection point for fire hoses used by firefighters during a fire emergency. It is located on the exterior of a building and is connected to the building's internal water supply either from a fire pump or a municipal water supply.
Q: Why is a breech inlet important?
A: During a fire emergency, firefighters need a reliable source of water to extinguish the flames. A breech inlet provides a direct connection to the building's water supply and ensures that firefighters can access the necessary water quickly and efficiently, helping to minimize damage to the property.
Q: How do you maintain a breech inlet?
A: Regular maintenance of a breech inlet is essential to ensure that it is functioning correctly in case of an emergency. The inlet should be inspected monthly for visible damage or obstructions. It should also be flushed annually to prevent any buildup of sediment or debris that could hinder water flow.
Q: Are there different types of breech inlet?
A: There are two types of breech inlets: threaded and flanged. Threaded inlets have male or female threads that are used to connect hoses directly. Flanged inlets have a flange connection that requires a gasket and bolts to seal the connection.
Q: Can a breech inlet be installed in any building?
A: Breech inlet can be installed in any building that requires fire protection systems. However, it is best to consult with a professional fire protection engineer to determine the appropriate size and location of the inlet for the specific building.
