Production introduction
Foinbo® deluge system valve is a crucial component of any fire protection system. It helps to prevent large-scale fires by activating water flow instantly throughout the protected area. This valve serves as the control point for water flow and is the first line of defense against potential fire outbreaks.
In practical terms, foinbo ® deluge system valve functions by initiating a deluge of water as soon as the detection system identifies the presence of fire or heat in the protected zone. It opens to allow water to flow through the pipes of the sprinkler system, dousing the flames and preventing the fire from spreading.
Product specification
|
Specification |
ZSFM-Deluge System Valve |
||||||
|
2" |
2.5" |
3" |
4" |
5" |
6" |
8" |
|
|
Rated Operation Pressure |
1.6Mpa |
||||||
|
Application Medium |
Water ,Foam mixture |
||||||
|
Connection Type |
Flange End |
||||||
|
Body Material |
Ductile Iron |
||||||
|
Installation |
Vertical |
||||||
|
Flange Standard |
BS4504 |
||||||
FAQ
Q: What is the purpose of a deluge valve?
A: Deluge valves are designed to deliver a large amount of water over a large area as rapidly as possible to quickly extinguish a fire. However, it's not always easy to distinguish between true deluge valves and on-off valves, which are also known as flow control valves or auto-resetting valves.
Q: Function of deluge valve in fire fighting system.
A: The deluge valve plays a crucial role in fire fighting systems by rapidly releasing a large volume of water or foam when a fire is detected. This helps to quickly extinguish the fire and prevent it from spreading, minimizing damage to property and protecting the safety of occupants.
Q: How does deluge work?
A: Deluge systems are triggered hydraulically, pneumatically or electrically and disperse water throughout the entire protection zone with open nozzles. In this way they reliably fight fires in rooms and facilities, even if a particularly fast spreading of the fire is to be expected.
Q: How to reset deluge valve?
A: To reset a Deluge valve, follow these simple steps:
1. Turn off the water supply to the Deluge valve.
2. Locate the reset button on the valve.
3. Press and hold the reset button for 10 seconds.
4. Release the reset button.
5. Turn on the water supply to the Deluge valve.
6. Check to ensure that the valve has been reset and is functioning properly.
Q: Deluge valve vs alarm check valve.
A: Deluge valves and alarm check valves are two different types of valves used in fire protection systems. A deluge valve is designed to quickly release a large volume of water in the event of a fire, while an alarm check valve is used to prevent backflow of water into the system and only releases water when there is a fire alarm or signal. Both valves play important roles in protecting buildings and property from fire damage