Production introduction
foinbo® Fire Jet Monitor is with a stacked tips, which is specially designed with a flow rate of 20LPS,30LPS,40LPS,making it ideal for extinguishing fire quickly and effciently.It is used for firefighting and cooling in industrial settings. This equipment is designed to provide a powerful and targeted stream of water to help control and suppress fires effectively. With its versatile and powerful features, the Fire Jet Monitor is a valuable tool in emergency response situations.
Products parameters
|
Model Number |
Flow Rate |
W.Pressure |
Water Max.Reach |
Inlet Flange |
|
SWM 8/20S-C |
1200 L/Min |
8 bar |
50 meters |
4 inch/DN100 @ BS4504 |
|
SWM 8/30S-C |
1800 L/Min |
8 bar |
55 meters |
4 inch/DN100 @ BS4504 |
|
SWM 8/40S-C |
2400L/Min |
8 bar |
60 meters |
4 inch/DN100 @ BS4504 |
FAQ
Q: What is the maximum flow rate of the fire jet monitor?
A: The maximum flow rate of the fire jet monitor varies depending on the model number. The SWM 8/20S-C has a flow rate of 1200 L/Min, SWM 8/30S-C has a flow rate of 1800 L/Min,SWM 8/40S-C has a flow rate of 2400 L/Min
Q: What is the working pressure of the fire jet monitor?
A: The working pressure of the fire jet monitor is 8 bar.
Q: What is the size of the inlet flange for the fire jet monitor ?
A: The inlet flange for the fire jet monitor is 4 inch/DN100 @ BS4504.
Q: What is the material used for the construction of fire jet monitor?
A: The monitor body of the fire jet monitoris made of aluminium alloy with red epoxy powder coating while the monitor nozzle and handle are made of SS304 Stainless steel.
Q: Can the fire jet monitor be used for foam jetting?
A: Yes, the fire jet monitor can be used for foam jetting,but the specially designed foam monitor will be more recommend.