Production introduction
foinbo® Fixed Manual Fire Foam Monitor is a critical component of industrial and commercial fire protection systems, designed to deliver high-volume foam solutions for extinguishing flammable liquid fires. This equipment combines mechanical durability, precise control, and rapid deployment capabilities to address large-scale fire hazards in high-risk environments such as oil refineries, chemical plants, storage terminals, and maritime vessels.
Monitor Body: Fabricated from corrosion-resistant materials such as aluminum alloy,he body supports 360° horizontal rotation and -45° to +85° vertical adjustment.
Nozzle Assembly: Equipped with interchangeable tips for flow rate customization (e.g., 24–48 LPM ), the nozzle enables operation: straight-stream jetting for long-range suppression.
Manual Control Mechanism: Operators adjust azimuth and elevation via a handwheel or lever, ensuring precision targeting without reliance on automation. Flange connections (e.g., ANSI 150, BS4504) ensure compatibility with fixed piping networks.
Products parameters
|
Model Number |
Flow Rate |
W.Pressure |
Water Max. Reach |
Foam Max. Reach |
Inlet Flange |
|
FM8/24B |
1440 L/Min |
8 bar |
50 meters |
42 meters |
4 inch/DN100 @ BS4504 |
| FM8/32B |
1920 L/Min |
8 bar |
55 meters |
48 meters |
4 inch/DN100 @ BS4504 |
| FM8/40B |
2400 L/Min |
8 bar |
60 meters |
55 meters |
4 inch/DN100 @ BS4504 |
| FM8/48B |
2880 L/Min |
8 bar |
65 meters |
65 meters |
4 inch/DN100 @ BS4504 |
FAQ
Q: What is the body material of the Fixed Fire Monitor?
A: It is a stationary device used to discharge foam or water to extinguish fires, manually operated by an adjustable nozzle.
Q: Where are Fixed Manual Foam Monitors typically installed?
A: They are commonly installed in industrial facilities, oil refineries, chemical plants, and airports.
Q: What is the main advantage of a Fixed Manual Foam Monitor?
A: It provides a high-capacity, directed foam/water stream for firefighting while being manually adjustable for precision.
Q: Can Fixed Manual Foam Monitors be used with water only?
A: Yes, they can discharge water, foam solution.
Q: What are the main components of a Fixed Manual Foam Monitor?
A: The monitor body, swivel joint, nozzle, handle, and sometimes a foam inductor.