Production introduction
The foinbo® manual fire fighting monitor is a device used to direct a high-capacity stream of water or firefighting foam at a fire. Unlike automatic or remote-controlled monitors, manual monitors are operated by a person on-site, using handwheels or levers to control direction and flow.
Products parameters
|
Model Number |
Flow Rate |
W.Pressure |
Max. Reach |
Max. Fog Angle |
Inlet Flange |
|
WM 8/15-50W–B |
900-1200-1800-2400-3000 L/Min |
8 bar |
65 meters |
120° |
4 inch/DN100 @ BS4504 |
FAQ
Q: How is manual fire fighting monitor operated?
A: Manual fire fighting monitors are controlled via hand wheels, levers, or tiller bars, allowing the operator to adjust the direction (horizontal and vertical) and flow pattern.
Q: What materials are used in manual fire fighting monitor construction?
A: Manual fire fighting monitors are typically made from corrosion-resistant materials such as:
Stainless steel, Brass, Hard anodized aluminum, These materials ensure durability in harsh environments.
Q: What is the typical flow rate of a manual fire fighting monitors?
A: The manual fire fighting monitors flow rates range from 300 to 20,000 liters per minute (LPM), depending on the model.
Q: What is the manual fire fighting monitor typical range of water jet?
A: Depending on pressure and nozzle type, ranges can exceed 40–60 meters (130–200 feet).
Q: Can manual fire fighting monitors be installed on vehicles?
A: Yes. Many fire trucks and industrial vehicles use manual fire fighting monitors for mobility and tactical flexibility.