Production introduction
The physical characteristics of this Stainless Steel Water Cannon Fire Monitor are remarkable. The monitor body of the Stainless Steel Water Cannon Fire Monitor is made of SS304 stainless steel, which offers excellent corrosion - resistance and durability, ensuring it can withstand harsh firefighting environments.
The monitor nozzle is an aluminium alloy with hard anodized treatment, providing good wear - resistance. The handle of the Stainless Steel Water Cannon Fire Monitor is also constructed from SS304 stainless steel, ensuring a sturdy and comfortable grip for the operators.
This Stainless Steel Water Cannon Fire Monitor is equipped with a nozzle that can produce both straight steam and fog patterns, allowing for flexible adjustment according to different firefighting scenarios. One of the outstanding features is its selectable flow rate. The model SWM 8/15 - 50W - C offers a wide range of selectable flow rates, from 900 L/Min to 3000 L/Min, all operating at a working pressure of 8 bar. With a maximum reach of 65 meters and a maximum fog angle of 120°, this Stainless Steel Water Cannon Fire Monitor can effectively cover a large area during firefighting operations.
Products parameters
|
Model Number |
Flow Rate |
W.Pressure |
Max. Reach |
Max. Fog Angle |
Inlet Flange |
|
SWM 8/15-50W–C |
900-1200-1800-2400-3000 L/Min(Selectable) |
8 bar |
50 meters |
120° |
4 inch/DN100 @ BS4504 |
FAQ
Q: Can the foinbo® Stainless Steel Water Cannon Fire Monitor be used in saltwater environments?
A: While the monitor body and handle of the Stainless Steel Water Cannon Fire Monitor are made of SS304 stainless steel, which has some resistance to corrosion, continuous exposure to saltwater can still cause degradation over time. It is possible to use it in saltwater environments, but after each use, it should be thoroughly rinsed with fresh water to remove salt deposits. Regular inspections for signs of corrosion are also recommended to maintain its performance and longevity.
Q: How do I change the spray pattern from straight steam to fog on the foinbo® Stainless Steel Water Cannon Fire Monitor?
A: The operation to change the spray pattern on the Stainless Steel Water Cannon Fire Monitor typically involves adjusting a specific mechanism on the nozzle. This may be a dial, lever, or a series of settings. Refer to the user manual provided with the monitor for detailed step - by - step instructions. In general, it is a simple process that can be done quickly during an emergency situation to adapt to the changing fire conditions.
Q: What is the recommended storage condition for the foinbo® Stainless Steel Water Cannon Fire Monitor?
A: The Stainless Steel Water Cannon Fire Monitor should be stored in a dry, well - ventilated area. Avoid storing it in locations with high humidity or extreme temperatures, as these can affect the performance of the materials over time. If possible, cover the monitor to protect it from dust and debris. Also, ensure that the monitor is properly supported and not placed under any stress that could damage its structure.
Q: Can the foinbo® Stainless Steel Water Cannon Fire Monitor be installed on different types of vehicles?
A: Yes, the Stainless Steel Water Cannon Fire Monitor can be installed on various types of vehicles such as fire trucks, industrial utility vehicles, or specialized firefighting trailers. The 4 inch/DN100 inlet flange compliant with BS4504 allows for standard connection to the water supply system of the vehicle. However, proper installation procedures must be followed, and it is advisable to consult a professional installer to ensure the monitor is securely and correctly mounted for safe and efficient operation.
Q: How often should the foinbo® Stainless Steel Water Cannon Fire Monitor be serviced?
A: Regular servicing of the Stainless Steel Water Cannon Fire Monitor is essential for its optimal performance. It is recommended to have a comprehensive service at least once a year, or more frequently if the monitor is used intensively. Servicing should include checking for any signs of wear and tear on the nozzle, handle, and body, inspecting the flow rate adjustment mechanism, and ensuring the proper functioning of the spray pattern selector. Additionally, any seals or gaskets should be checked for leaks and replaced if necessary.