Production introduction
In terms of physical characteristics, the monitor body of the Water Cannon For Fire Fighting is crafted from an aluminium alloy with red epoxy powder coating, offering corrosion resistance and a durable exterior.
The monitor nozzle, made of hard - anodized aluminium alloy, enhances wear resistance. The handle, constructed from SS304 stainless steel, ensures a firm grip. The standout feature is its Stacked Tips nozzle. This innovative design allows precise control over water flow distribution.
Firefighters can adjust the water output to suit different fire scenarios-delivering a concentrated stream for distant flames or a broader flow to cover larger areas effectively.
Products parameters
|
Model Number |
Flow Rate |
W.Pressure |
Max. Reach |
Max. Fog Angle |
Inlet Flange |
|
WM 7/35-75A |
2100-4500 L/Min |
7 bar |
50 meters |
120° |
4 inch/DN100 @ BS4504 |
FAQ
Q: How does the Stacked Tips nozzle of the Water Cannon For Fire Fighting improve firefighting precision?
A: The Stacked Tips nozzle of the Water Cannon For Fire Fighting allows firefighters to adjust water flow patterns. It enables switching between concentrated streams for targeting specific fire sources and broader flows for covering larger areas, enhancing precision in different firefighting scenarios.
Q: Can the Water Cannon For Fire Fighting maintain performance during prolonged high - pressure use?
A: Yes, the Water Cannon For Fire Fighting is designed to withstand prolonged use at its specified 7 bar working pressure. However, regular maintenance-checking for component wear, ensuring no leaks, and lubricating moving parts-is essential to sustain optimal performance over time.
Q: How to clean the Stacked Tips nozzle of the Water Cannon For Fire Fighting after use?
A: After use, shut off the water supply. Disassemble the nozzle (following the manual) and clean debris with a soft brush or compressed air. Rinse thoroughly with clean water. Regular cleaning prevents clogging and ensures the nozzle functions properly for next - use efficiency.
Q: What environmental conditions might affect the red epoxy powder coating of the Water Cannon For Fire Fighting?
A: While the red epoxy powder coating on the Water Cannon For Fire Fighting resists general weathering, prolonged exposure to harsh chemicals or extreme UV radiation may degrade it. Avoid direct contact with corrosive substances and periodically inspect the coating for damage, reapplying it if necessary.
Q: Can the Water Cannon For Fire Fighting's flow rate be adjusted during emergency firefighting?
A: The Water Cannon For Fire Fighting's flow rate (2100–4500 L/Min) is adjustable via its internal mechanism. Refer to the user manual to use the adjustment controls (like valves or switches) during emergencies, allowing quick adaptation to different fire - suppression requirements.