Production introduction
This Fixed Water Cannon boasts impressive physical characteristics. The monitor body of the Fixed Water Cannon is crafted from an aluminium alloy with a red epoxy powder coating, offering both corrosion resistance and a durable exterior.
The monitor nozzle, also featuring an aluminium alloy with red epoxy powder coating, ensures consistent performance and wear resistance. The handle of the Fixed Water Cannon, made from SS304 stainless steel, provides a sturdy and comfortable grip. A standout feature is its nozzle, which supports both straight steam and fog patterns, along with a selectable flow rate.
With a maximum reach of 65 meters and a 120° maximum fog angle, this Fixed Water Cannon ensures wide - ranging fire suppression. The 4 - inch/DN100 inlet flange (BS4504 - compliant) allows for easy integration with water supply systems. Whether used in industrial complexes or urban firefighting, the foinbo® Fixed Water Cannon is a trusted choice for effective fire control.
Products parameters
|
Model Number |
Flow Rate(Selectable) |
W.Pressure |
Max. Reach |
Max. Fog Angle |
Inlet Flange |
|
WM 8/15-50W–A |
900-1200-1800-2400-3000 L/Min |
8 bar |
65 meters |
120° |
4 inch/DN100 @ BS4504 |
FAQ
Q: How do I adjust the flow rate of the foinbo® Fixed Water Cannon during operation?
A: The Fixed Water Cannon's flow rate is adjustable through its built - in mechanism. Locate the flow rate adjustment control (usually a dial or lever near the handle or nozzle). Refer to the user manual for specific steps to switch between the 900–1200–1800–2400–3000 L/Min settings based on the fire - fighting needs.
Q: Can the foinbo® Fixed Water Cannon be used in outdoor environments with high humidity?
A: Yes, the Fixed Water Cannon is designed to withstand outdoor conditions. The red epoxy powder coating on the monitor body and nozzle resists moisture - related corrosion. However, after prolonged use in high - humidity environments, regularly inspect for any signs of water accumulation inside the cannon and ensure all components are dry to maintain optimal performance.
Q: What should I do if the nozzle of the foinbo® Fixed Water Cannon gets clogged?
A: If the Fixed Water Cannon's nozzle clogs, first shut off the water supply. Disassemble the nozzle (following the manual's instructions) and remove debris using a soft brush or compressed air. Rinse the nozzle thoroughly with clean water. Regularly clean the nozzle after use, especially if the water source contains impurities, to prevent clogs.
Q: How does the red epoxy powder coating on the foinbo® Fixed Water Cannon benefit its lifespan?
A: The red epoxy powder coating on the Fixed Water Cannon acts as a protective layer. It shields the aluminium alloy body and nozzle from rust, chemical exposure, and physical damage. This coating prolongs the cannon's lifespan by preventing corrosion and maintaining the structural integrity of components, even in harsh firefighting environments.
Q: Can the foinbo® Fixed Water Cannon be integrated with automatic firefighting systems?
A: The Fixed Water Cannon's 4 - inch/DN100 inlet flange (BS4504 - compliant) allows for connection to various water supply systems. While it is primarily a manual monitor, it can be integrated into semi - automatic or automatic firefighting setups with additional control valves or automation kits. Consult with system engineers to ensure compatibility and proper integration.