Production introduction
In terms of physical characteristics, the monitor body of the Water Cannon For Fire Truck is constructed from SS304 stainless steel, providing excellent corrosion resistance and durability. This is crucial for withstanding the rigors of firefighting operations and various environmental conditions. The monitor nozzle, made of aluminium alloy with red epoxy powder coating, not only ensures consistent performance but also offers protection against wear and tear. The handle, crafted from SS304 stainless steel, provides a firm and comfortable grip for firefighters operating the Water Cannon For Fire Truck.
A key feature of the foinbo® Water Cannon For Fire Truck is its "Straight Steam only" design. This design allows for a concentrated and high - velocity water stream to be projected, which is highly effective in reaching distant fires and penetrating through thick smoke and flames. Whether it's a blaze in a large industrial facility or a high - rise building, the Water Cannon For Fire Truck can direct water precisely to the source of the fire.
The SWM_D SERIES offers models such as SWM 8/20S - D, SWM 8/30S - D, and SWM 8/40S - D. The SWM 8/20S - D has a flow rate of 1200 L/Min, operating at a working pressure of 8 bar with a maximum reach of 50 meters. The SWM 8/30S - D provides a higher flow rate of 1800 L/Min, also at 8 bar, with a maximum reach of 55 meters. The SWM 8/40S - D offers a flow rate of 2400 L/Min, operating at 8 bar, with a maximum reach of 60 meters. All models are equipped with a 4 - inch/DN100 inlet flange compliant with BS4504, ensuring easy and secure connection to the water supply system on fire trucks.
Products parameters
|
Model Number |
Flow Rate |
W.Pressure |
Max. Reach |
Max. Fog Angle |
Inlet Flange |
|
SWM 8/20S–D |
1200 L/Min |
8 bar |
50 meters |
120° |
4 inch/DN100 @ BS4504 |
|
SWM 8/30S–D |
1800 L/Min |
8 bar |
55 meters |
120° |
4 inch/DN100 @ BS4504 |
|
SWM 8/40S–D |
2400 L/Min |
8 bar |
60 meters |
120° |
4 inch/DN100 @ BS4504 |
FAQ
Q: How does the "Straight Steam only" design of the foinbo® Water Cannon For Fire Truck improve firefighting efficiency?
A: The "Straight Steam only" design of the Water Cannon For Fire Truck creates a highly focused and powerful water stream. This allows firefighters to reach fires at greater distances, penetrate through dense smoke and flames, and directly target the base of the fire. In comparison to other spray patterns, the straight - steam design minimizes water dispersion, ensuring that more water reaches the fire source, thus significantly improving firefighting efficiency.
Q: Can the foinbo® Water Cannon For Fire Truck be used in both urban and industrial firefighting scenarios?
A: Yes, the Water Cannon For Fire Truck is highly versatile and can be effectively used in both urban and industrial firefighting scenarios. In urban areas, it can be used to combat building fires, vehicle fires, etc., by reaching the flames accurately. In industrial settings, where fires can be more intense and spread over larger areas, the cannon's high - flow rates and long reach capabilities make it suitable for suppressing fires in factories, warehouses, and refineries.
Q: How should I maintain the red epoxy powder coating on the monitor nozzle of the foinbo® Water Cannon For Fire Truck?
A: To maintain the red epoxy powder coating on the monitor nozzle of the Water Cannon For Fire Truck, regularly clean the surface using a mild detergent and a soft cloth. Avoid using abrasive cleaners or tools that could scratch the coating. Periodically inspect the coating for any signs of damage, such as chips or cracks. If damage is detected, repair it promptly using a compatible epoxy paint to prevent corrosion of the underlying aluminium alloy.
Q: What factors should I consider when choosing a model of the foinbo® Water Cannon For Fire Truck?
A: When choosing a model of the Water Cannon For Fire Truck, consider the typical fire scenarios your fire truck will encounter. If you often deal with smaller fires in urban areas or need to reach fires at shorter distances, a model like SWM 8/20S - D may be sufficient. For larger fires in industrial areas or when a greater reach and higher water flow are required, models such as SWM 8/30S - D or SWM 8/40S - D would be more appropriate. Also, take into account the water supply capacity and pressure available on your fire truck to ensure compatibility with the chosen model.
Q: Can the foinbo® Water Cannon For Fire Truck be easily installed and removed from a fire truck?
A: The Water Cannon For Fire Truck is designed to be relatively easy to install and remove from a fire truck. The 4 - inch/DN100 inlet flange, compliant with BS4504, allows for standard connection to the fire truck's water supply system. However, proper installation procedures should be followed to ensure a secure and leak - free connection. When it comes to removal, with the right tools and following the manufacturer's guidelines, the cannon can be taken off the fire truck for maintenance or replacement as needed.