Production introduction
Constructed with an aluminium alloy monitor body finished in red epoxy powder coating (for enhanced corrosion resistance) and a hard - anodized aluminium alloy nozzle, the Portable Remote Control Fire Monitors For Fire achieves a perfect balance between durability and portability. Its remote - control system allows operators to adjust the monitor's vertical travel (ranging from - 30° to + 70°) and switch between jetting patterns (straight stream or fog) without physical contact with hazards, significantly boosting both safety and operational flexibility.
The WMKDY/8/50W model of the Portable Remote Control Fire Monitors For Fire delivers outstanding performance: a flow rate of 3000 L/min under an 8 - bar working pressure, a maximum water reach of 65 meters, and a 90° max fog angle. The straight - stream mode excels at long - range fire suppression, while the fog pattern provides extensive coverage for cooling or smothering flames. Equipped with a 2″-DN65 inlet, it integrates smoothly with standard hoses, minimizing deployment time.
Designed with mobility in mind, the Portable Remote Control Fire Monitors For Fire is ideal for situations where speed and safety are crucial. Its portable design allows for quick repositioning, and remote operation reduces personnel exposure to heat and smoke. For modern firefighting teams, this monitor is a dependable tool that combines power, precision, and protection.
Products Parameters
|
Model Number |
Flow Rate |
W.Pressure |
Water Max.Reach |
Max. Fog Angle |
Inlet Size |
|
WMKDY 8/50W |
3000 L/Min |
8 bar |
65 meters |
90° |
2*DN65 |
Products Description
FAQ
Q: Does the remote control work through obstacles like walls?
A: The remote control of the Portable Remote Control Fire Monitors For Fire uses radio frequency (RF) signals. While it can penetrate thin obstacles, thick walls or metal structures may weaken the signal. For best results, maintain a clear line - of - sight or stay within the 100 - meter range for stable control.
Q: How to test the monitor's functionality before an emergency?
A: Conduct a pre - use check: connect the hose, power on the remote, test vertical movement (- 30° to + 70°), switch jetting patterns, and verify water flow. Run a short - duration (1–2 minute) operation to ensure all components work smoothly.
Q: Can the monitor be used in marine firefighting scenarios?
A: Yes. The aluminium alloy construction of the Portable Remote Control Fire Monitors For Fire resists saltwater corrosion. However, rinse it thoroughly with fresh water after marine use and apply a corrosion - inhibiting coating to maintain longevity.
Q: What happens if the remote control malfunctions during operation?
A: The monitor has a manual override mode. Switch to manual control via the onboard knob to adjust angle and jet pattern. Always keep spare batteries for the remote and test them regularly to prevent failures.
Q: How does the monitor handle high - pressure water sources above 8 bar?
A: The Portable Remote Control Fire Monitors For Fire is rated for 8 bar. For sources exceeding this, install a pressure - reducing valve to avoid damaging internal components. Excessive pressure may reduce the monitor's lifespan or cause leaks.