Production introduction
Constructed with an aluminium alloy monitor body and a hard - anodized aluminium nozzle, RC Portable Fire Monitors balance durability and portability. The WMKDY/8/50W model showcases exceptional specs: a 3000 L/min flow rate at 8 bar working pressure, a 65 - meter maximum water reach, and a 90° fog angle. Its vertical travel range of - 30° to + 70° allows precise targeting of low - lying fires and elevated blaze sources alike.
The remote - control functionality of RC Portable Fire Monitors is a game - changer. Operators can adjust jet patterns (straight stream or fog) and angle positions wirelessly, adapting to dynamic fire behavior in real - time. The 2″ DN65 inlet ensures seamless integration with standard hoses, enabling quick setup even in time - critical situations.
Whether combating chemical spills, warehouse fires, or outdoor blazes, RC Portable Fire Monitors deliver consistent power and precision. Their portable design supports rapid repositioning, while remote operation enhances safety - making them a vital asset for modern firefighting teams.
Products Parameters
|
Model Number |
Flow Rate |
W.Pressure |
Water Max.Reach |
Max. Fog Angle |
Inlet Size |
|
WMKDY 8/50W |
3000 L/Min |
8 bar |
65 meters |
90° |
2*DN65 |
Products Description
FAQ
Q: How to calibrate the remote - control angle settings for RC Portable Fire Monitors?
A: Power on the monitor and remote. Navigate to the calibration menu on the remote, then manually adjust the monitor to - 30° (lowest) and + 70° (highest) positions. Save these endpoints; the remote will now sync accurately with the monitor's angle range.
Q: Does cold weather affect the remote battery life of RC Portable Fire Monitors?
A: Yes. In temperatures below 0°C, battery life may drop by 20–30%. Use lithium - ion batteries (rated for cold climates) and keep spares warm in insulated cases. Pre - warm the remote briefly before use to optimize performance.
Q: Can multiple RC Portable Fire Monitors be controlled simultaneously via one remote?
A: With compatible software, up to 4 monitors can be grouped under a single remote. Assign unique IDs to each unit, then program the remote to switch between them or sync their movements for coordinated fire suppression.
Q: How to protect RC Portable Fire Monitors from sand and dust in desert environments?
A: Apply silicone - based seals around the nozzle and control ports. After use, blow compressed air through the inlet and nozzle to clear debris. Store the monitor in a sealed case with desiccant packs to prevent dust buildup.
Q: What's the recommended maintenance interval for RC Portable Fire Monitors?
A: For frequent use (weekly+), inspect seals and lubricate moving parts every 3 months. For occasional use, a yearly inspection suffices. Always test remote functionality and water flow after maintenance.