Production introduction
Constructed with an aluminium alloy body (coated in red epoxy powder for corrosion resistance) and a hard - anodized aluminium nozzle, Electrical Portable Fire Monitors balance durability and mobility. The integrated electric system enables seamless adjustment of vertical travel (ranging from - 30° to + 70°) and jet patterns (straight stream or fog), controllable via wired or wireless interfaces. Models like the WMKDY/8/50W deliver a 3000 L/min flow rate at 8 bar pressure, achieving a 65 - meter water reach and a 90° max fog angle - powerful enough for large - scale blazes yet precise for targeted suppression.
A standout feature of Electrical Portable Fire Monitors is their power flexibility: they run on rechargeable batteries (supporting 4–6 hours of continuous use) or external power sources, ensuring reliability in off - grid scenarios. The 2″ DN65 inlet connects swiftly to standard hoses, and the compact frame allows easy transport by two personnel. Whether combating chemical fires, warehouse infernos, or wildland blazes, these monitors deliver consistent, electric - enhanced performance.
In essence, Electrical Portable Fire Monitors redefine on - demand fire suppression. Their electric controls enable precise, remote - managed responses, while portability ensures rapid deployment - making them indispensable for modern firefighting teams in complex, high - risk environments.
Products Parameters
|
Model Number |
Flow Rate |
W.Pressure |
Water Max.Reach |
Max. Fog Angle |
Inlet Size |
|
WMKDY 8/50W |
3000 L/Min |
8 bar |
65 meters |
90° |
2*DN65 |
Products Description




FAQ
Q: How to verify the electrical system's integrity of Electrical Portable Fire Monitors?
A: Use a multimeter to test voltage output at the control module. Power on the monitor and check for smooth motor operation during angle adjustments. If unresponsive, inspect wiring for damage or loose connections.
Q: Can the monitor's jet pressure be adjusted electrically?
A: No, jet pressure depends on the water source. However, the electric system optimizes jet pattern distribution (e.g., fog density) based on pre - set pressure ranges for consistent performance.
Q: What's the process to update the monitor's control software?
A: Connect the monitor to a laptop via USB. Download the latest firmware from the manufacturer's site, then use the provided software to install updates. Ensure the monitor is powered during the process to avoid corruption.
Q: How to protect the monitor's electric components from extreme heat?
A: Position the monitor at least 3 meters away from direct fire sources. Use heat - resistant covers for the control box during operation, and allow the unit to cool before storage after use.
Q: Are there size limitations for hoses connected to Electrical Portable Fire Monitors?
A: The 2″ DN65 inlet supports hoses of 2–3 inches in diameter. Larger hoses may require adapters, and excessively long hoses (over 100 meters) could reduce water pressure, impacting performance.

