Production introduction
Constructed from durable carbon steel, Foam Chambers For Tanks ensure long - term reliability in harsh industrial environments. They operate within a working pressure range of 0.3–0.6MPa, compatible with standard fire - suppression setups. Adhering to BS4504/GB flange standards, these chambers integrate seamlessly into tank - protection systems, ensuring efficient foam delivery.
A key feature of Foam Chambers For Tanks is their low - expansion foam generation, with an expansion ratio of ≥5 times. This creates a dense, effective foam blanket that suppresses fires by smothering flames and cooling tank surfaces. The 25% liquid drain time of ≥120s ensures sustained foam coverage, critical for extinguishing stubborn fires.
Available in models like PCL4 (240 LPM flow rate) to PCL24 (1440 LPM), Foam Chambers For Tanks cater to diverse tank sizes. Inlet and outlet sizes range from 2"/2.5" to 5"/6", allowing precise matching to tank - specific fire - protection needs. Whether safeguarding small storage tanks or large industrial vessels, these chambers deliver tailored fire - suppression performance.
In summary, foinbo® Foam Chambers For Tanks combine robust construction, precise foam - generation capabilities, and scalable design. They are essential for protecting storage tanks in refineries, chemical plants, and fuel - storage facilities, ensuring rapid and effective fire suppression to minimize risks and losses.
Products Parameters
|
Model Number |
Type |
Flow Rate |
Inlet Size |
Outlet Size |
|
PCL4 |
Low Expansion,vertical |
240LPM |
50mm(2'') |
80mm (3'') |
|
PCL8 |
Low Expansion,vertical |
480LPM |
65mm(2.5'') |
100mm(4'') |
|
PCL16 |
Low Expansion,vertical |
960LPM |
80mm (3'') |
150mm(6'') |
|
PCL24 |
Low Expansion,vertical |
1440LPM |
100mm (4'') |
200mm (8'') |
Products Features
| Body Material |
Carbon Steel; |
| Working Pressure Range |
0.3-0.6MPa; |
| Expansion | Low expansion,≥5 Times; |
| 25% Liquid Drain Time | ≥ 120 s; |
|
Flange Standard of Proportioner |
ANSI / BS4504 / GB; |
| Surface Finishing | Painting |
Products Description
Products Detailed
FAQ
Q: How to select the right Foam Chambers For Tanks model?
A: Match the chamber to your tank's size and fire - risk level. Consider flow rate (e.g., 240 LPM for small tanks, 1440 LPM for large ones) and inlet/outlet sizes. Consult fire - safety standards or engineers for precise sizing.
Q: Can Foam Chambers For Tanks be used in outdoor freezing conditions?
A: Yes, but insulate them to prevent water/foam from freezing. Use winter - grade foam concentrates and ensure proper drainage to avoid damage in subzero temperatures.
Q: What maintenance do Foam Chambers For Tanks require?
A: Regularly inspect for corrosion (carbon steel is durable but needs checks in harsh environments). Test foam expansion and drain times annually. Clean internal components to prevent blockages.
Q: How do Foam Chambers For Tanks handle high - pressure surges?
A: Designed for 0.3–0.6MPa, they include pressure - relief features. In case of surges, the system's valves and the chamber's construction work together to stabilize pressure and maintain foam output.
Q: Can Foam Chambers For Tanks be retrofitted to existing tank systems?
A: Yes, as they follow BS4504/GB flange standards. Ensure the existing system's pressure and flow rates match the chamber's specs. Modify piping if needed for inlet/outlet compatibility.