Products Introduction
foinbo® 1000L IBC Foam Concentrate is engineered to address the urgent fire safety needs of ultra-large facilities with frequent emergency preparedness requirements-such as new energy industrial parks, cross-border land port hubs, and bulk cement storage yards. Unlike conventional bulk foam containers, this 1000L Intermediate Bulk Container (IBC) integrates three emergency-focused designs: a 4-inch quick-connect valve with a self-sealing gasket (cuts connection time by 60% vs. standard valves), a built-in low-temperature preheating system (for G 3% (-22℃) variant, prevents freezing in -25℃ to -22℃ environments), and a transparent HDPE inner tank (enables visual inspection of concentrate clarity without opening the unit). 1000L IBC Foam Concentrate offers two tailored variants: G 3% (-15℃) for humid coastal industrial zones and G 3% (-22℃) for alpine logistics centers, ensuring consistent performance even in extreme climate fluctuations.
The fire-fighting capability of 1000L IBC Foam Concentrate is enhanced by innovations that solve real-world industrial pain points. The G 3% (-15℃) variant delivers a foam expansion ratio of ≥610, generating over 610,000 liters of foam to cover a 22,000+ square meter area-with added foam adhesion technology that lets it cling to vertical surfaces (like storage tank walls) for up to 15 minutes, preventing flame re-ignition on equipment exteriors. The G 3% (-22℃) model maintains an expansion rate of ≥470 and includes an anti-dust contamination formula, which avoids clogging in foam generators when used in dusty environments (e.g., metallurgical plants or cement yards). Both variants feature a 50% drainage time of 20–26 minutes, ensuring the foam stays intact long enough to suppress deep-seated fires in stacked cargo or machinery cavities.
1000L IBC Foam Concentrate is designed to reduce long-term operational costs while boosting system compatibility. It uses a universal interface that works with 95% of industrial fire pumps (from brands like Grundfos and Pentair), eliminating the need for custom adapters that add expense and delay. The steel outer frame is modular-damaged parts (like forklift pockets or base pads) can be replaced individually instead of replacing the entire IBC, cutting maintenance costs by 30%. Additionally, the unit is compatible with standard industrial cleaning systems: after emptying, it can be rinsed with high-pressure water (no special solvents needed) and refilled with 1000L IBC Foam Concentrate, supporting circular use and reducing waste.
Products Parameters
|
Model |
G 3% (-15℃) |
G 3% (-22℃) |
|
Appearance |
Colorless Luqid |
|
|
PH |
8.9-9.0 |
6.6-7.3 |
|
Viscosity @ 20℃ |
≤30 MPas |
≤30 MPas |
|
Expansion Ratio |
≥565 |
≥420 |
|
50% Drainage Time |
18( 1±20% ) min |
13( 1±20% ) min |
|
Freezing Point |
-15℃ |
-22℃ |
Products Description
Application Detail
- New Energy Solar Inverter Factories: In 30,000+ square meter factories with dense inverter production lines, 1000L IBC Foam Concentrate (-15℃ variant) excels. Its foam adhesion technology covers the vertical surfaces of inverter cabinets, smothering electrical fires without damaging sensitive components. The quick-connect valve lets fire teams deploy foam within 2 minutes of alarm activation, minimizing production loss.
- Cross-Border Land Port Cargo Yards: For 50,000+ square meter yards storing stacked shipping containers (with flammable goods like textiles or electronics), 1000L IBC Foam Concentrate (-15℃ variant) is ideal. Its high expansion ratio fills the gaps between containers, reaching flames hidden in cargo stacks, while the transparent inner tank allows staff to check reserve levels during daily patrols.
- Bulk Cement Storage Parks: In dusty cement storage facilities, 1000L IBC Foam Concentrate (-22℃ variant) avoids operational hiccups. Its anti-dust formula prevents cement particles from clogging the foam generator, ensuring consistent foam output when suppressing fires in cement silo discharge ports or conveyor belts.
FAQs
Q: Can the built-in preheating system of the -22℃ variant be used while the 1000L IBC Foam Concentrate is being discharged?
A: Yes. The preheating system operates independently of the discharge valve, maintaining the concentrate at 0–5℃ (optimal for flow) even during continuous use. This ensures 1000L IBC Foam Concentrate remains fluid and effective, even in -25℃ alpine environments.
Q: How to verify if the self-sealing gasket of the quick-connect valve is still effective?
A: Conduct a monthly pressure test: connect the valve to a 0.5MPa air source, submerge the joint in water, and check for bubbles. If no bubbles appear, the gasket is intact. Replace the gasket once a year (or after 10+ connections) to keep 1000L IBC Foam Concentrate ready for emergency use.
Q: Is 1000L IBC Foam Concentrate compatible with foam additives (like anti-freeze boosters) for extremely cold areas?
A: Yes, but only use foinbo-approved additives. Mixing unapproved additives may damage the HDPE inner tank or reduce foam performance. Foinbo provides a dedicated anti-freeze booster for -30℃ to -22℃ use, which blends seamlessly with 1000L IBC Foam Concentrate.
Q: What is the maximum height the foam from 1000L IBC Foam Concentrate can reach when used with a standard fire pump?
A: Up to 35 meters. When paired with a 7.5kW industrial fire pump (flow rate ≥80L/min), the foam can reach the top of 10-story industrial buildings-suitable for high-rise warehouse fire suppression using 1000L IBC Foam Concentrate.
Q: How to dispose of the HDPE inner tank if the IBC is no longer usable?
A: The HDPE tank is 100% recyclable. Rinse it with water to remove residual concentrate, then contact local plastic recycling facilities-they accept the tank as "food-grade HDPE scrap." Foinbo also offers a take-back program for old IBCs, ensuring eco-friendly disposal of 1000L IBC Foam Concentrate packaging.