Products Introduction
foinbo® Foam Concentrate G 3% 200L is a purpose-built fire safety solution crafted for small-to-medium enterprises, including workshops, regional warehouses, and commercial facilities, where fast deployment and reliable coverage are critical. Housed in a durable 200L HDPE container with an integrated anti-spill pouring spout and ergonomic side handles, this product balances sufficient fire-fighting capacity with manual maneuverability-two staff members can transport and set it up in under 5 minutes, no heavy machinery required. Foam Concentrate G 3% 200L is available in two climate-adapted variants: G 3% (-15℃) for temperate indoor spaces and G 3% (-22℃) for cold-storage annexes or outdoor use in frigid regions, ensuring consistent performance across daily operational environments.
The technical efficiency of Foam Concentrate G 3% 200L lies in its optimized foam formula, designed to tackle common industrial and commercial fire risks. The G 3% (-15℃) variant delivers a foam expansion efficiency of ≥575, converting a full 200L container into over 115,000 liters of dense, adhesive foam-enough to cover a 3,000+ square meter area, ideal for warehouses with palletized goods. The G 3% (-22℃) model maintains an expansion rate of ≥435, with both variants featuring a foam retention period (50% drainage time) of 16–21 minutes to smother flames and prevent re-ignition. The formula also includes anti-contamination additives, allowing Foam Concentrate G 3% 200L to perform effectively even when mixed with slightly impure water (e.g., well water with low mineral content), a common scenario in regional facilities.
This product integrates seamlessly into daily operational workflows, with design details that prioritize long-term usability. The 200L container's stackable design (up to 3 units when empty) saves storage space in utility rooms, while the UV-resistant HDPE material protects the concentrate from sunlight degradation during outdoor storage. Its 3% water-mixing ratio aligns with standard portable foam generators and small-scale fixed fire systems, eliminating the need for custom calibration. Whether used as a primary fire safeguard for a 500㎡ workshop or a backup reserve for a regional distribution center, Foam Concentrate G 3% 200L delivers cost-effective, hassle-free fire protection tailored to mid-scale needs.
Products Parameters
|
Model |
G 3% (-15℃) |
G 3% (-22℃) |
|
Appearance |
Colorless Luqid |
|
|
PH |
8.9-9.0 |
6.6-7.3 |
|
Viscosity @ 20℃ |
≤30 MPas |
≤30 MPas |
|
Expansion Ratio |
≥565 |
≥420 |
|
50% Drainage Time |
18( 1±20% ) min |
13( 1±20% ) min |
|
Freezing Point |
-15℃ |
-22℃ |
Products Description
Application Detail
- Small Chemical Formulation Labs: In 100–200㎡ labs handling flammable solvents or reagents, Foam Concentrate G 3% 200L (-15℃ variant) excels. Its dense, low-residue foam smothers small-scale spills without damaging glassware or equipment, and the 21-minute retention period provides enough time to secure hazardous materials before emergency teams arrive.
- Cold-Chain Logistics Sorting Zones: For 300–500㎡ sorting areas in 冷链 warehouses (temperatures above -22℃), Foam Concentrate G 3% 200L (-22℃ variant) remains fully functional. Its cold-resistant formula avoids freezing in sub-zero environments, and the foam's rapid expansion fills the space between conveyor belts and packaging, suppressing fires from electrical malfunctions or packaging materials.
- Automotive 4S Shop Repair Bays: In 200–400㎡ repair bays with oil, grease, and fuel residues, Foam Concentrate G 3% 200L (-15℃ variant) creates a vapor-sealing blanket over flammable spills. The foam's adhesive properties cling to vertical surfaces (e.g., engine blocks, tool cabinets), preventing flame spread and minimizing damage to vehicles or equipment.
FAQs
Q: Can the foam from Foam Concentrate G 3% 200L adhere to oily surfaces without sliding off?
A: Yes. The formula includes a tackifier that enhances adhesion to oily or wet surfaces, such as engine parts or spilled fuel. This ensures the foam stays in place to smother flames, making Foam Concentrate G 3% 200L ideal for automotive or mechanical repair environments.
Q: Is Foam Concentrate G 3% 200L easy to transport through narrow stairwells in multi-story facilities?
A: Absolutely. The container's ergonomic side handles and 200L capacity (weight ~220kg when full) allow two people to carry it up standard stairwells. For tighter spaces, the pouring spout can be removed to reduce width, ensuring Foam Concentrate G 3% 200L is accessible in multi-level workshops or warehouses.
Q: Can Foam Concentrate G 3% 200L be used with manual foam guns for spot fire suppression?
A: Yes. It pairs seamlessly with standard 10–20L/min manual foam guns. Mix the concentrate with water at the 3% ratio, pour into a portable tank, and connect the foam gun-this setup is perfect for spot-suppressing small fires in remote areas of a facility using Foam Concentrate G 3% 200L.
Q: How to dispose of Foam Concentrate G 3% 200L that has expired or become contaminated?
A: Contact foinbo's environmental services team for guided disposal. The concentrate is biodegradable, but it should not be poured into drains or soil directly. Foinbo partners with certified waste handlers to process expired Foam Concentrate G 3% 200L in compliance with local environmental regulations.
Q: Does connecting Foam Concentrate G 3% 200L to a fixed fire system require professional installation?
A: Basic plumbing knowledge is sufficient for simple connections. The container's 2-inch discharge valve fits standard fire hoses and proportioners. For complex systems (e.g., automated triggers), foinbo recommends professional calibration to ensure optimal performance of Foam Concentrate G 3% 200L.