Synthetic Fire Foam Concentrate

Synthetic Fire Foam Concentrate

Built to counter petroleum‑related fire events, **Synthetic Fire Foam Concentrate** excels at putting out fires sparked by gasoline, kerosene and diesel, and delivers secondary mitigation for ordinary solid combustible blazes. Field operators need to follow the specified dilution proportion strictly to unlock the full performance of **Synthetic Fire Foam Concentrate**.
Send Inquiry
Description
Technical Parameters
1

Products Introduction

 

Synthetic Fire Foam Concentrate represents a man‑made foam firefighting medium engineered for Class‑B flammable liquid hazards, delivering reliable fire suppression without protein‑based raw materials. Presented as translucent yellow‑hued fluid, Synthetic Fire Foam Concentrate features low viscosity figures under normal ambient temperature, enabling seamless flow across long pipeline routes, foam generators and water cannons even under moderate pressure fluctuations. Once mixed with water at calibrated ratios, Synthetic Fire Foam Concentrate generates voluminous foam layers that float atop burning hydrocarbon surfaces, cut oxygen supply and suppress hazardous vapour release. Its moderately alkaline chemical profile allows compatibility with multiple water sources, including fresh surface water and salt‑infused seawater for coastal job sites.

 

Synthetic Fire Foam Concentrate is offered in two mixing versions: 3% and 6% dilution grades, with different freezing thresholds to cope with cold‑weather operating zones. Synthetic Fire Foam Concentrate maintains stable physical properties through lengthy idle storage cycles, resisting stratification and sediment build‑up when kept under suitable sheltered surroundings. End‑users can pick compact canisters for partial top‑ups or bulk drums for large‑scale project filling, bringing flexibility for system integrators and wholesale purchasers. This Synthetic Fire Foam Concentrate suits both permanently installed fire safety infrastructure and quick‑deploy mobile firefighting kits for on‑demand emergency response.

 

2

Products Parameters

 

Model

S 3% (-20℃)

S 6% (-22℃)

Appearance

Clear Yellowish Liquid

PH

8.7-8.9

8.6-8.7

Viscosity @ 20℃

≤30 MPas

≤30 MPas

Expansion Ratio

6.4±1

6.5±1

25% Drainage Time

2.8( 1±20% ) min

2.9(1±20%) min

Freezing Point

-20℃

-22℃

 

3

Products Description

product-750-750
1
product-750-750
1
4

Application Detail

 

 

  • Petrol Filling Station Complex: Serve multi‑island urban fuel filling stations, respond to accidental petrol spill fires at refuelling nozzles and underground tank chamber zones.
  • Offshore On‑deck Processing Module: Fit non‑offshore‑rig coastal processing platforms, mitigate fire threats from leaked fuel inside open‑air deck processing and transfer zones.
  • Bitumen Manufacturing Workshop: Apply within asphalt and bitumen production workshops, handle high‑temperature hydrocarbon liquid fire hazards during material processing and transfer.
  • Fuel Tank Truck Parking Depot: Deploy at large‑scale tanker parking yards, offer fire defence for parked road tankers where fuel leakage and surface ignition may take place.

 

5

FAQs

 

Q: How does Synthetic Fire Foam Concentrate behave when exposed to direct sunlight for extended periods?

A: Continuous ultraviolet exposure will accelerate agent ageing. Keep drums and canisters sheltered; avoid long‑term direct sunlight, otherwise foaming efficiency will gradually drop ahead of nominal shelf life.

 

Q: Is Synthetic Fire Foam Concentrate suitable for intermittent discharge systems that activate very rarely?

A: It can be utilised for seldom‑triggered systems. Schedule periodic sampling inspections, since years‑long idle storage may trigger subtle performance shifts invisible to naked eyes.

 

Q: What cleanup steps are required after Synthetic Fire Foam Concentrate is used for real‑fire emergencies?

A: Flush pipelines and proportioning assemblies with clean water post‑discharge. Collect foam‑mixed wastewater and treat it following local environmental rules before disposal, do not discharge untreated effluents freely.

 

Q: Can Synthetic Fire Foam Concentrate be mixed with protein foam agents for combined system usage?

A: Blending synthetic foam with protein‑based foam products is highly discouraged. Incompatible chemical reactions may arise, leading to foam breakdown and total loss of fire‑fighting capability.

 

Q: What kind of filter mesh specification fits best for Synthetic Fire Foam Concentrate feeding pipelines?

A: Select 40‑60 mesh filter elements. Too‑fine filters risk flow restriction, while overly coarse filters cannot block foreign particles that may jam foam‑making nozzles.

Hot Tags: synthetic fire foam concentrate, China synthetic fire foam concentrate manufacturers, suppliers, factory, 3 Afff Foam Concentrate, Afff Foam Concentrate, Concentrated Foam, foam concentrate, Foam Concentrate for Foam Markers, Foam Marker Concentrate