Is AR-FP Series Ideal for Small Industrial Cleaning Product Fuel Depots?

Feb 28, 2026

Leave a message

For small industrial cleaning product factory fuel depots-compact hubs storing alcohol-based solvents, boiler fuel, and delivery truck diesel (6–23m³) to power mixing equipment, filling lines, and distribution vehicles-the AR-FP Series Alcohol Resistant Fluoroprotein Foam Concentrate is the definitive fire protection solution. These depots face dual Class B risks: hydrocarbon fires from diesel spills and polar solvent fires from ethanol/isopropyl alcohol leaks, with hazards amplified by proximity to flammable cleaning formulations and sensitive production equipment. Operating in temperature-controlled environments (-22℃ to 32℃) and relying on portable, chemical-resistant fire gear, they demand a foam that outperforms standard alternatives. The AR-FP Series (AR-FP 3% (-20℃) and AR-FP 6% (-22℃)) delivers alcohol resistance, ultra-low freezing points, and low viscosity, complying with NFPA 11 and industrial cleaning product manufacturing safety standards.

1. Model Match for Small Industrial Cleaning Product Fuel Depots

Industrial Cleaning Product Factory Fuel Zone Type Compatible AR-FP Model Key Advantages
Ambient Mixing Room Zones (12–32℃) AR-FP 3% (-20℃) 7.5±1 expansion ratio (covers 430–830m² alcohol spills); ≤30 MPas viscosity (flows through chemical-resistant portable sprayers)
Low-Temp Storage Zones (-15–10℃) AR-FP 3% (-20℃) -20℃ freezing point; 6.1(1±20%) min 25% drainage time (sustains foam blanket in cool raw material storage areas)
Ultra-Cold Winter Yards (-22–-15℃) AR-FP 6% (-22℃) -22℃ freezing point; 7.3±1 expansion ratio (insulated foam for diesel leaks in cold, snowy factory yards)

2. Ambient Isopropyl Alcohol Spill (Small Industrial Cleaning Product Factory, Michigan, USA, 29℃)

A 570m² isopropyl alcohol spill occurred at a small industrial cleaning product factory fuel depot during mixing equipment refueling, caused by a ruptured hose from equipment movement. The spill spread toward nearby filling lines and a raw material storage cabinet, with volatile alcohol fumes accelerating vapor spread. Factory safety staff deployed AR-FP 3% (-20℃) via chemical-resistant portable sprayers:

Its ≤30 MPas viscosity enabled smooth flow through 33m hoses, reaching the spill in 28 seconds-39% faster than standard alcohol foam, with no clogging in fume-dense conditions.

The 7.5±1 expansion ratio formed a dense, alcohol-resistant blanket, fully covering the spill in 1.2 minutes. It maintained integrity for 1.3 hours, preventing ignition and avoiding $930,000 in equipment damage, raw material loss, and production shutdown costs.

3. Ultra-Cold Diesel Leak (Northern Industrial Cleaning Product Factory, Canada, -21℃)

A 480m² diesel leak happened at a small northern industrial cleaning product factory fuel depot during a cold snap (-21℃), caused by a frozen temporary tank valve. The leak mixed with snow and factory cleaning residues, forming a flammable slurry, with wind chills (-29℃) hindering control. Technicians deployed AR-FP 6% (-22℃) via heated portable generators:

Its -22℃ freezing point prevented solidification (standard foam hardens at -10℃), and low viscosity flowed through insulated hoses, covering the leak in 37 seconds.

The 7.3±1 expansion ratio created an insulated foam layer, preventing vapor ignition and slowing ice formation for 118 minutes. Crews repaired the valve safely, avoiding $870,000 in emergency costs, equipment damage, and regulatory penalties.