🔥 Medium Velocity Directional Spray Nozzle (MVDS Nozzle)
A Medium Velocity Directional Spray Nozzle is an open-type fire protection nozzle designed to discharge water in a controlled, directional spray pattern at medium velocity.
It is primarily used in fixed water spray systems to protect specific hazards by cooling surfaces, controlling fire exposure, and preventing fire spread.
⚙️ How It Works
The MVDS nozzle is installed in a deluge or water spray system (normally dry piping).
When a fire is detected, the deluge valve opens and water flows simultaneously through all nozzles.
Each nozzle discharges a predefined spray angle and flow pattern, directing water precisely onto:
Equipment surfaces
Structural members
Cable trays
Hazardous zones
Unlike sprinklers, MVDS nozzles do not activate individually-they operate as part of a total flooding spray system.
🧩 Key Characteristics
| Feature | Description |
|---|---|
| Type | Open directional nozzle (no thermal element) |
| Discharge Pattern | Fan-shaped or conical directional spray |
| Velocity | Medium (balanced between reach and atomization) |
| Function | Cooling, exposure protection, fire control |
| Installation | Fixed position aimed at hazard |
| Materials | Brass, Stainless Steel (SS304/SS316) |
| K-Factor Range | Selected based on required density |
🎯 Why "Medium Velocity"?
Medium velocity provides an optimized balance:
Higher momentum than low-velocity spray → better surface penetration and reach
Less turbulence than high-velocity spray → avoids splashing of flammable liquids
Uniform water film formation → excellent for cooling and heat absorption
This makes MVDS ideal for exposure protection rather than extinguishment alone.
🏭 Typical Applications
Medium velocity spray systems are widely used in high-risk industrial facilities such as:
Power generation plants (transformers, turbines)
Petrochemical and oil & gas facilities
LNG/LPG installations
Cable galleries and tunnels
Conveyor systems
Chemical processing equipment
Fuel loading racks
These environments require directed cooling and radiant heat control rather than ceiling-level sprinkler discharge.
📐 Spray Angles & Coverage Options
MVDS nozzles are manufactured with specific discharge angles to match hazard geometry:
15° / 30° → Narrow, long-throw protection
60° / 90° → Equipment surface coverage
120° → Wide-area exposure cooling
✅ Advantages
✔ Precise directional protection of critical equipment
✔ Excellent cooling and heat radiation reduction
✔ Prevents structural failure and fire escalation
✔ Suitable for outdoor and high-ventilation hazards
✔ Immediate full-system operation via deluge activation
✔ Low maintenance (no moving parts)
⚠️ Design Considerations
Requires accurate hazard analysis and nozzle orientation.
Must be hydraulically calculated for density and coverage overlap.
Obstruction analysis is critical to avoid shadow areas.
Typically used with deluge valves and detection systems, not standalone.
Material selection must consider corrosion and environment.
