The steps to use a fire monitor mainly include the following steps:
Preparation:
Confirm whether the fire monitor is normal, including checking whether the monitor body, pipes and nozzles are intact, and whether the water source is connected normally.
Open the water source valve to ensure that the water source is unobstructed and can be supplied to the fire monitor.
If the fire monitor has an electric control method, check whether the power supply and control system are normal to ensure that the angle of the fire monitor and the flow rate of the sprayed water can be remotely controlled.
Operation steps:
Adjust the angle of the monitor: Adjust the monitor body to the desired angle through the control system or manual operation. You can choose horizontal, vertical or other angles.
Control the spray flow: Adjust the water spray flow of the fire monitor through the control system or manual operation. It can usually be adjusted to small, medium, large and other grades to meet the needs of different fire conditions.
Adjust the spray distance: According to the actual situation at the fire scene, adjust the water spray distance of the fire monitor to achieve the best fire extinguishing effect.
Select the spray mode: Fire monitors can usually adjust the spray mode, including direct current water column, mist spray and rotary spray, etc., to adapt to different types of fires.