Water Foam Cannon With Self Educting

Water Foam Cannon With Self Educting

The foinbo® Water Foam Cannon With Self Educting, belonging to the FM_B SERIES, is a state - of - the - art firefighting apparatus that combines advanced functionality with robust construction. This Water Foam Cannon With Self Educting is engineered to provide efficient and effective fire suppression in a variety of scenarios.
Send Inquiry
Description
Technical Parameters

Production introduction

 

A standout feature of the foinbo® Water Foam Cannon With Self Educting is its foam self - educting capability. This innovative feature allows the cannon to automatically draw in and mix the appropriate amount of foam concentrate with water, creating a ready - to - use foam solution for firefighting.

 

Additionally, with its "Straight Steam only" design, the cannon can project a concentrated stream of water or foam, making it highly effective for reaching distant fires and penetrating through flames.

 

The FM_B SERIES offers models such as FM 8/24Z - B, FM 8/32Z - B, FM 8/40Z - B, and FM 8/48Z - B. The FM 8/24Z - B has a flow rate of 1440 L/Min, operating at 8 bar with a water maximum reach of 50 meters and a foam maximum reach of 42 meters.

 

Products parameters

 

Model Number

Flow Rate

W.Pressure

Max. Water Reach

Max. Foam Reach

Inlet Flange

FM 8/24Z-B

1440 L/Min

8 bar

50 meters

42 meters

4 inch/DN100 @ BS4504

FM 8/32Z-B

1920 L/Min

8 bar

55 meters

48 meters

4 inch/DN100 @ BS4504

FM 8/40Z-B

2400 L/Min

8 bar

60 meters

55 meters

4 inch/DN100 @ BS4504

FM 8/48Z-B

2880 L/Min

8 bar

65 meters

60 meters

4 inch/DN100 @ BS4504

 

FAQ

 

Q: How does the foam self - educting feature of the foinbo® Water Foam Cannon With Self Educting work?

A: The foam self - educting feature of the Water Foam Cannon With Self Educting operates based on the principle of fluid dynamics. As water flows through the cannon, it creates a suction effect that draws in the foam concentrate from its storage container. The water and foam concentrate are then mixed in the appropriate ratio within the cannon to produce a foam solution. This automatic process eliminates the need for manual mixing, allowing for a quicker response during firefighting operations.

Q: Can the foinbo® Water Foam Cannon With Self Educting be used in fires involving electrical equipment?

A: When dealing with fires involving electrical equipment, caution must be exercised. In general, water - based firefighting can pose a risk of electrical shock. However, if the power source to the electrical equipment has been safely shut off, the Water Foam Cannon With Self Educting can be used. The foam produced can help smother the fire and prevent reignition. It's crucial to follow proper safety protocols and ensure that the area is safe before using the cannon in such situations.

Q: How should I maintain the foam self - educting system of the foinbo® Water Foam Cannon With Self Educting?

A: Regular maintenance of the foam self - educting system is essential. After each use, flush the system with clean water to remove any remaining foam concentrate and debris. Inspect the hoses and connections for leaks or blockages. Periodically check the accuracy of the foam - to - water mixing ratio by following the manufacturer's recommended testing procedures. Also, ensure that the foam concentrate storage container is kept clean and filled with the appropriate type of foam concentrate as specified by the manufacturer.

Q: What should I do if the water or foam reach of the foinbo® Water Foam Cannon With Self Educting is not as expected?

A: First, verify that the water supply pressure is at the required 8 bar. Check the inlet flange connection for any leaks or obstructions that might be reducing the flow. Inspect the nozzle for any blockages or damage that could affect the projection of water or foam. If the issue persists, refer to the troubleshooting section of the user manual or contact the manufacturer's technical support for further assistance.

Q: Can the foinbo® Water Foam Cannon With Self Educting be installed in a fixed firefighting system?

A: Yes, the Water Foam Cannon With Self Educting can be integrated into a fixed firefighting system. Its 4 - inch/DN100 inlet flange compliant with BS4504 allows for standard connection to water and foam supply lines in such systems. However, proper installation and configuration are required to ensure that it operates in harmony with the rest of the fixed system components. It's advisable to consult with a professional installer or the manufacturer to ensure correct installation and optimal performance within the fixed firefighting system.

 

Hot Tags: water foam cannon with self educting, China water foam cannon with self educting manufacturers, suppliers, factory, fire monitor application, manual fire monitor spray pattern, industrial fire monitor, Fire Fighting Water Monitors, manual fire monitor in entertainment industry, fire monitor